Become a Member
I have by mistake upload a config as a custom default configuration and was wondering if there was someway that the default configuration could be restored so i can restore the switch the correct configuration.
Is it possible with the boot room module to copy the config.def file to a usb and then copy that config.def to the broken switch thus restoring the config.
Or can i can just get a empty config file with no settings or anything and copy that over the switch using the tftp or usb option.
Not sure what switch we're talking about here, but if you're not interested in saving any configs on the switch and you just want to re-configure it properly, you could factory reset it. That'll overwrite any "default" (startup) configuration you've set. Instructions may vary but generally on ProCurve these should work:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=3901671&prodTypeId=12883&objectID=c01983060