Network Management

 View Only
last person joined: 3 days ago 

Keep an informative eye on your network with HPE Aruba Networking network management solutions
Back to discussions
Expand all | Collapse all

Removing aaa authentication ssh command from cli

This thread has been viewed 15 times

  • 1.  Removing aaa authentication ssh command from cli

    Posted Jun 14, 2024 08:24 AM

    I'm trying to remove the config in red box from Aruba, but I'm not able to.  

    I tried no aaa authentication ssh enable radius server-group mgmt local but that's not a valid syntax for the cli.



  • 2.  RE: Removing aaa authentication ssh command from cli
    Best Answer

    Posted Jun 14, 2024 09:59 AM

    If that is for ArubaOS Switch (example 2540/2930/3810/5400R), then you would enter the default for the command to get it removed.

    Can you try:

    aaa authentication ssh enable local

    If it's not an ArubaOS Switch, it may help to mention the model number and firmware version.



    ------------------------------
    Herman Robers
    ------------------------
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

    In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
    ------------------------------

    Original Message


  • 3.  RE: Removing aaa authentication ssh command from cli

    Posted Jun 14, 2024 10:08 AM

    @Herman Robers, thank you so much, that's what I was looking for.


    Original Message


  • 4.  RE: Removing aaa authentication ssh command from cli

    Posted Jun 14, 2024 10:25 AM

    Weirdly, I'm able to use 'no' to take out other commands above it, but not that one.

    That's what got me stuck.


    Original Message