Cloud Managed Networks

 View Only

  • 1.  Rogue Detection is disabled, please contact Aruba Support to have this feature enabled.

    Posted May 05, 2021 10:04 AM
    Hi all, I have seen this screen for many new Central accounts:


    Why is it not enabled by default? Why do we have to contact support to request it to be enabled?

    ------------------------------
    Abdel Castro Perpuli
    ------------------------------


  • 2.  RE: Rogue Detection is disabled, please contact Aruba Support to have this feature enabled.

    Posted May 05, 2021 11:10 AM
    I would love to know the answer to this too!


    ------------------------------
    Dustin Burns

    If my post was useful accept solution and/or give kudos
    ------------------------------

    Original Message


  • 3.  RE: Rogue Detection is disabled, please contact Aruba Support to have this feature enabled.

    Posted May 06, 2021 06:26 AM
    I'm not categorically sure why it's a request only feature but if I was to guess it would be because it's a stream of private data that a customer should opt in to sending up to the cloud. BSSIDs + RSSI essentially equals location, when you leverage this data against a third party location api service such as Google's. 

    I could be wrong, this is purely my own opinion.
    Original Message


  • 4.  RE: Rogue Detection is disabled, please contact Aruba Support to have this feature enabled.

    Posted May 06, 2021 09:42 AM
    I hadn't thought about this but I think it could be a good reason, thank you for sharing!

    ------------------------------
    Abdel Castro Perpuli
    ------------------------------

    Original Message


  • 5.  RE: Rogue Detection is disabled, please contact Aruba Support to have this feature enabled.

    Posted Feb 06, 2024 02:42 PM

    In order to enable IDS/IPS, select the group you want to enable IDS/IPS services for --> navigate to Devices --> select Access Points tab --> select Config --> select the Security tab --> scroll down to Wireless IDS/IPS --> configure desired settings in Detection & Protection which are in the Off position by default.


    Original Message


Related Content