Wireless Access

 View Only

  • 1.  Roles and Policies Rules Don't Match Up

    Posted Jan 04, 2022 08:51 AM
    I just noticed that my Role and Policy rules are different depending on whether I'm viewing them on Mobility Master or the controller name. Is there a way to force the rules to flow down from the Mobility Master to the controller so that they sync up? I'm guessing at some point I made rule changes on the controller level and not the mobility master level which has lead to this.

    ------------------------------
    Seth Turner
    ------------------------------


  • 2.  RE: Roles and Policies Rules Don't Match Up

    Posted Jan 04, 2022 09:42 AM
    Seth,
    I am going through the same thing at this time.  From my understanding (fairly new at this), you will have to delete them off of the controller and add them at the Mobility level.  I would verify this with support.

    ------------------------------
    Gary French
    ------------------------------

    Original Message


  • 3.  RE: Roles and Policies Rules Don't Match Up

    Posted Jan 04, 2022 09:46 AM
    Edited by DB86 Jan 04, 2022 09:46 AM
    You will want to configure user roles and policies  below the /md level (best practice to leave /md level at default). For example at /md/Company or /md/Company/SiteA. Config at the /mm or /mydevice level do not propagate to the /md levels. They are two separate branches of the config.

    ------------------------------
    Dustin Burns
    Lead Mobility Engineer @WEI

    ACCX 1271| ACMX 509| ACSP | ACDA | MVP Guru 2021
    If my post was useful accept solution and/or give kudos
    ------------------------------

    Original Message


Related Content