Network Management

 View Only

Secondary login as local did not work until Disable Radius Client on NPS

This thread has been viewed 5 times
  • 1.  Secondary login as local did not work until Disable Radius Client on NPS

    Posted Mar 16, 2023 10:59 PM

    Dear Friends,

    I would like to find out why my secondary login is not working on my Aruba 2930M switch. Every time I have to disable Radius Client on NPS server, so can log in as local users. I remember on Aruba CX 6900, it has Authentication Fail through....

    Here is my result of Show Authentication:

    Status and Counters - Authentication Information

    Authorized enabled as backup for secondary login are preceded by *

      Login Attempts : 2

      Lockout Delay : 0   

      Respect Privilege : Enabled 

      Bypass Username For Operator and Manager Access : Disabled

                     | Login       Login        Login     

      Access Task    | Primary     Server Group Secondary

      -------------- + ----------- ------------ ----------

      Console        | Local                    None      

      Telnet         | Local                    None      

      Port-Access    | ChapRadius  radius       None      

      Webui          | PeapRadius  radius       Local     

      SSH            | PeapRadius  radius       Local     

      Web-Auth       | ChapRadius  radius       None      

      MAC-Auth       | ChapRadius  radius       None      

      SNMP           | Local                    None      

      Local-MAC-Auth | Local       radius       None      

      REST           | Local                    None      

                     | Enable      Enable       Enable    

      Access Task    | Primary     Server Group Secondary

      -------------- + ----------- ------------ ----------

      Console        | Local                    None      

      Telnet         | Local                    None      

      Webui          | PeapRadius  radius       Local     

      SSH            | PeapRadius  radius       Local     

      REST           | Local                    None      

    Any idea why? 

    Thanks a lot