Wired Intelligent Edge

 View Only
  • 1.  Selective QinQ on AOS-CX

    Posted 25 days ago

    Hi,

    Is the the 8325 switch the only AOS-CX switch that supports selective QinQ?

    Thanks

    qinq vlan-map

    Arubanetworks remove preview
    qinq vlan-map
    Description Configures selective QinQ for customer network ports, based on a list of customer VLANs (vlan-map) for a specified service VLAN. The no form of this command removes selective customer VLAN list for the specified service VLAN. This command is applicable only for access port.
    View this on Arubanetworks >



  • 2.  RE: Selective QinQ on AOS-CX

    Posted 25 days ago

    It was introduced for the 8325 and 8400 in AOS-CX 10.12

    As stated on your link :-)

    I do not see if mentioned in the CLI bank for any others.




  • 3.  RE: Selective QinQ on AOS-CX

    Posted 25 days ago

    you can use Aruba Switch Feature Navigator  to check it and it indeed it was introduced in 8.12.0006



    ------------------------------
    If my post was useful accept solution and/or give kudos.
    Any opinions expressed here are solely my own and not necessarily that of HPE or Aruba.
    ------------------------------



  • 4.  RE: Selective QinQ on AOS-CX

    Posted 24 days ago

    Good points with the Feature Navigator - wish you could export to CSV or Excel.

    Feature Navigator also confirms that it is currently only in 8325 and 8400.




  • 5.  RE: Selective QinQ on AOS-CX

    Posted 24 days ago

    Then I know, thank you.