Comware

 View Only
Back to discussions
Expand all | Collapse all

Server: System Health not recognized by PS1810-8G / ProLiant Microserver Gen8

This thread has been viewed 0 times

  • 1.  Server: System Health not recognized by PS1810-8G / ProLiant Microserver Gen8

    Posted May 31, 2015 07:12 PM
      |   view attached

    Hello, I can´t get the  server (HP Microserver Gen8) - system health status to get recognized by the switch HP 1810-8G.

     

    The server IP is  not recognized automatically byt the switch - as it should under the menu Servers / Monitor Servers, only if ILO port manually added it recognizes the server type  -  (ProLiant MicroServer Gen8)  - but no health status is shown.

     

    Please give me some clues or what to set up to get it work - on server or switch side.

     

     

    thanks



  • 2.  RE: Server: System Health not recognized by PS1810-8G / ProLiant Microserver Gen8

    Posted Aug 06, 2015 12:37 AM

    Had exactly the same issue, updated firmware on the PS1810-8G to Version 2.04 resolved 

     

    https://h10145.www1.hp.com/downloads/DownloadSoftware.aspx?SoftwareReleaseUId=12303&ProductNumber=J9833A&lang=&cc=&prodSeriesId=&OrderNumber=&PurchaseDate

     



Related Content