Wired

 View Only
last person joined: 5 days ago 

Back to discussions
Expand all | Collapse all

SNMP getting failed on SolarWind

This thread has been viewed 11 times

  • 1.  SNMP getting failed on SolarWind

    Posted Jul 29, 2024 11:02 AM

    Hello Team,

    Please help here, solerwind team saying SNMP getting failed. what need to check or configure in the switch while SNMP configuration is there.

    Thanks.



  • 2.  RE: SNMP getting failed on SolarWind

    Posted Jul 30, 2024 12:06 PM

    There are many switches out there, many options/versions to configure SNMP, so it's hard to tell why it's failed.

    I would recommend to have a look with your Aruba partner at the settings.

    Oh yes, quite often the issue is in a firewall blocking the SNMP traffic somewhere.



    ------------------------------
    Herman Robers
    ------------------------
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

    In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
    ------------------------------

    Original Message


  • 3.  RE: SNMP getting failed on SolarWind

    Posted Aug 03, 2024 09:52 AM

    configure the context properly from the switch side and bind it with the community name even if you don't use snmpv2.

    I remember solarwinds did not work until we configured the snmp context.

    also verify the aes type, aes-128 or aes-256 from both sides.


    Original Message