Wireless Access

 View Only
last person joined: 4 days ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

SNMPV3 config IAP aruba central

This thread has been viewed 3 times

  • 1.  SNMPV3 config IAP aruba central

    Posted Aug 30, 2024 04:24 AM

    team, would like setup snmpv3 for my IAP 315 through aruba central, already created a username and set auth/privacy protocol. Is the community string mandatory for snmpv3 and how about the traps ? 

    Thanks 



  • 2.  RE: SNMPV3 config IAP aruba central

    Posted Aug 30, 2024 04:38 AM

    Communities are SNMPv2, so for SNMPv3 you set users and no need to set community. For traps as well, you set the username and version 3.



    ------------------------------
    Herman Robers
    ------------------------
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

    In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
    ------------------------------

    Original Message