I agree that the slide from the training material and comments below are conflicting. I would check the
Fundamental Guides for the switches that you have, which are the 'authoritative sources' of information.
From that, it seems that on the 6200/6300/6400, SSH is enabled by default on the mgmt VRF only, on 6000/6100/4100i only on the default VRF.
I'll try to report this to the education team as well, or you can do the same as well through
arubatraining@hpe.com.
------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check
https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
------------------------------
Original Message:
Sent: Dec 20, 2022 06:56 AM
From: Adam Campbell
Subject: SSH for Mgmt VRF and Default VRF
Hi,
Can anyone confirm for me please the default state of SSH on both the MGMT VRF and default VRF please on a 6300 switch and non 6300 switch.
The documentation revision that I have seems to have conflicting information. Or maybe I am just not reading it correctly.
TIA.