Wired Intelligent Edge

 View Only

  • 1.  Storm Control

    Posted Feb 19, 2019 11:51 PM

    Does anyone know how to configure Multicast storm control on 2530? Something similair to this -> https://community.arubanetworks.com/t5/Wired-Intelligent-Edge-Campus/How-to-configure-Storm-Control/ta-p/186800

     

    Cheers



  • 2.  RE: Storm Control

    Posted Feb 20, 2019 08:27 AM
    @DaveB91 wrote:

    Does anyone know how to configure Multicast storm control on 2530? Something similair to this -> https://community.arubanetworks.com/t5/Wired-Intelligent-Edge-Campus/How-to-configure-Storm-Control/ta-p/186800

     

    Cheers

    this example is for comware i think

    but you have the same setting on ArubaOS using rate-limit

     

    2530(config)# interface 1 rate-limit
all Set a rate limit for all traffic.
bcast Set a rate limit for broadcast traffic.
icmp Set a rate limit for ICMP traffic.
mcast Set a rate limit for multicast traffic.
unknown-unicast Set a rate limit for unicast flood traffic.

     



  • 3.  RE: Storm Control

    Posted Feb 21, 2019 03:19 PM

    Hi Dave,

    As Alexis told you, that command is a way to simulate some kind of storm control.

    You can refer to page 124 of this manual:

    https://support.hpe.com/hpsc/doc/public/display?docId=a00061561en_us

    Regards



Related Content