Comware

 View Only

  • 1.  Switch 1910 does not create routes Direct (vlan-interfaces)

    Posted Sep 24, 2015 08:56 AM

    hello, I have a problem with a switch switch 1910 JE006A. 

     

    my version of firmware is the latest , but check with previous versions and gives the same problem.

     

    to create a VLAN interface. not the dynamic route is created:

     

    *1     10.20.0.1 /24                  UP    MANUAL

    10     10.20.10.1/24                 UP    MANUAL 

    20     10.202.20.1/24                 UP    MANUAL

     

    0.0.0.0 255.255.255.0 Static 1 10.20.0.1 Vlan-interface1

    127.0.0.0 255.0.0.0 Direct 0 127.0.0.1 InLoopBack0

    127.0.0.1 255.255.255.255 Direct 0 127.0.0.1 InLoopBack0

    10.20.0.1 255.255.255.0 Direct 0 10.20.0.230 Vlan-interface1

    10.20.0.230 255.255.255.255 Direct 0 127.0.0.1 InLoopBack0

     

     

     

    this is normal? I would not have to add me routes to these interfaces as it does with VLAN 1

     

    Thank you!



  • 2.  RE: Switch 1910 does not create routes Direct (vlan-interfaces)

    Posted Sep 24, 2015 12:51 PM
    Is there any device connected to the VLAN 10 or 20? Perform this test ..


  • 3.  RE: Switch 1910 does not create routes Direct (vlan-interfaces)

    Posted Sep 24, 2015 04:50 PM
    that was the problem! now I have another problem , connect the PC to the VLAN 10 or 20 with the interface you create for that VLAN does not answer ping me .. this as taged port VLAN it belongs


  • 4.  RE: Switch 1910 does not create routes Direct (vlan-interfaces)

    Posted Sep 24, 2015 06:40 PM

    You'd better open a new case. The original case is already solved.



Related Content