Wired Intelligent Edge

 View Only

  • 1.  Switch aruba 6100 DHCP SNOOPING

    Posted Aug 14, 2023 10:30 AM

    I'm trying to activate DHCP Snooping to pass DHCP but I can't use the command, it doesn't exist in the 6100?

    Config:


    6100(config-if)# int 1/1/47
    6100(config-if)# dhcpv4-snooping
    Invalid input: dhcpv4-snooping
    6100(config-if)# config
    6100(config)# dhcpv4-snooping
    Invalid input: dhcpv4-snooping
    6100(config)#



  • 2.  RE: Switch aruba 6100 DHCP SNOOPING
    Best Answer

    Posted Aug 15, 2023 04:06 AM

    According to the Feature Navigator, dhcpv4 snooping should be available on the 6100 starting with the 10.09.0002 release. Are you on that release or newer?



    ------------------------------
    Herman Robers
    ------------------------
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

    In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
    ------------------------------

    Original Message


  • 3.  RE: Switch aruba 6100 DHCP SNOOPING

    Posted Aug 28, 2023 04:25 PM

    Thank you!


    Original Message


Related Content