This short Technote about Multi Cluster Wi-Fi Mesh and Ethernet Bridging with AOS10 APs is the continuation of Wi-Fi Mesh with AOS10 APs technote series in which I'll build on the previous solution and demonstrate the following
- Ethernet bridging over Wi-Fi mesh cluster
- Configure multiple Wi-Fi mesh clusters
- Test Mesh cluster failover
Hope you'll find this short technote useful and as always please send through your feedback for improvement.
------------------------------
If my post was useful accept solution and/or give kudos.
Any opinions expressed here are solely my own and not necessarily that of HPE or Aruba.
------------------------------