Aruba APs with AOS10 firmware can utilise Wi-Fi mesh technology to expand Wi-Fi coverage in both outdoor and indoor settings.
In this short technote I'll cover the following:
- Dual band configuration for AP-605H and AP-615s to use 5GHz and 6GHz bands
- Mesh cluster using 6GHz band.
- Wireless Client access over 6GHz mesh link
- Using APIs to modify mesh configuration
Hope you'll find this short technote useful and as always please send through your feedback for improvement
------------------------------
If my post was useful accept solution and/or give kudos.
Any opinions expressed here are solely my own and not necessarily that of HPE or Aruba.
------------------------------