Note that SD-Branch as an architecture is managed by Aruba Central. When moving to 8.10.0.8, you will convert to a Mobility Controller architecture, so no longer SD-Branch.
Depending on what you want to achieve, that could be what you want. And yes, as mentioned you will need to start the configuration from the Mobility Conductor (MCR) from scratch (wipe) or join in a group with existing configuration to be pushed from the MCR.
------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check
https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
------------------------------
Original Message:
Sent: Oct 29, 2023 12:12 AM
From: aroonbird
Subject: Upgrade SD-Branch 8.6.0.4-2.2.0.3 to ArubaOS 8.10.0.8 via MC
I want upgrade Aruba 9004, Now use version 8.6.0.4-2.2.0.3 and controll AP, I will upgrade to version 8.10.0.8 via Mobility Conductor(8.10.0.8).
Can do it ? , might remove all configuration from the device ?
Please help.