Wired Intelligent Edge

Hi There,

I have an old 3com Switch 4210 which gonna replace with HP ProCurve 2510.

I found that the configuration is totally different between these two switches.

Is anyone can help to 'convert' the old 3Com config to the new HP ProCurve 2510?

-----3com Switch 4210-----
[SW09]display current-configuration
#
sysname SW09
#
undo password-control aging enable
undo password-control length enable
undo password-control history enable
password-control login-attempt 3 exceed lock-time 120
#
local-server nas-ip 127.0.0.1 key 3com
#
priority trust
#
igmp-snooping enable
#
radius scheme system
#
domain system
#
local-user admin
service-type ssh telnet terminal
level 3
local-user manager
password simple manager
service-type ssh telnet terminal
level 2
local-user monitor
password simple monitor
service-type ssh telnet terminal
level 1
#
vlan 1
igmp-snooping enable
#
vlan 11 to 17
#
vlan 100
#
interface Vlan-interface1
ip address 10.10.10.12 255.255.255.0
#
interface Aux1/0/0
#
interface Ethernet1/0/1
stp edged-port enable
port link-type trunk
port trunk permit vlan 1
#
interface Ethernet1/0/2
stp edged-port enable
#
interface Ethernet1/0/3
stp edged-port enable
port access vlan 13
#
interface Ethernet1/0/4
stp edged-port enable
port access vlan 16
#
interface Ethernet1/0/5
stp edged-port enable
port access vlan 11
#
interface Ethernet1/0/6
stp edged-port enable
port access vlan 100
#
interface Ethernet1/0/7
stp edged-port enable
port access vlan 100
#
interface Ethernet1/0/8
stp edged-port enable
port access vlan 15
#
interface Ethernet1/0/9
stp edged-port enable
port access vlan 15
#
interface Ethernet1/0/10
stp edged-port enable
port access vlan 15
#
interface Ethernet1/0/11
stp edged-port enable
#
interface Ethernet1/0/12
stp edged-port enable
port access vlan 16
#
interface Ethernet1/0/13
stp edged-port enable
port access vlan 16
#
interface Ethernet1/0/14
stp edged-port enable
port access vlan 16
#
interface Ethernet1/0/15
stp edged-port enable
port access vlan 16
#
interface Ethernet1/0/16
stp edged-port enable
port access vlan 11
#
interface Ethernet1/0/17
stp edged-port enable
port access vlan 15
#
interface Ethernet1/0/18
stp edged-port enable
port access vlan 16
#
interface Ethernet1/0/19
stp edged-port enable
port access vlan 15
#
interface Ethernet1/0/20
stp edged-port enable
port access vlan 13
#
interface Ethernet1/0/21
stp edged-port enable
port access vlan 14
#
interface Ethernet1/0/22
stp edged-port enable
port access vlan 15
#
interface Ethernet1/0/23
stp edged-port enable
port access vlan 15
#
interface Ethernet1/0/24
stp edged-port enable
port access vlan 14
#
interface GigabitEthernet1/0/25
stp edged-port enable
port link-type trunk
port trunk permit vlan 1 11 to 17 100
#
interface GigabitEthernet1/0/26
stp edged-port enable
#
interface GigabitEthernet1/0/27
stp edged-port enable
port link-type trunk
port trunk permit vlan 1 11 to 17 100
shutdown
#
interface GigabitEthernet1/0/28
stp edged-port enable
shutdown
#
interface NULL0
#
ip route-static 0.0.0.0 255.255.255.0 192.168.1.1 preference 60
#
snmp-agent
snmp-agent local-engineid 
snmp-agent community read public
snmp-agent community write private
snmp-agent sys-info version all
#
user-interface aux 0
authentication-mode scheme
user-interface vty 0 4
authentication-mode scheme
#
return

I'm trying to fix the trunk port first. My port 25 is set as trunk and with the required tagged vlans. However I just cant ping to the core switch like the 3Com does. 

Default route are same in both old and new switches.

3com Switch 4210

interface GigabitEthernet1/0/25
stp edged-port enable
port link-type trunk
port trunk permit vlan 1 11 to 17 100

HP ProCurve 2510

SW13                                                        1-Jan-1990   1:33:12
==========================- CONSOLE - MANAGER MODE -============================
               Switch Configuration - VLAN - VLAN Port Assignment

  Port   DEFAULT_VLAN     vlan11        vlan12        vlan13
  ---- + ------------  ------------  ------------  ------------
  15   | Untagged      No            No            No
  16   | Untagged      No            No            No
  17   | Untagged      No            No            No
  18   | Untagged      No            No            No
  19   | Untagged      No            No            No
  20   | Untagged      No            No            No
  21   | Untagged      No            No            No
  22   | Untagged      No            No            No
  23   | Untagged      No            No            No
  24   | Untagged      No            No            No
  26   | Untagged      No            No            No
  Trk1 | Tagged        Tagged        Tagged        Tagged

 Actions->   Cancel     Edit     Save     Help

Select the tagging mode for the port/VLAN combination.
Use arrow keys to change field selection, <Space> to toggle field choices,
and <Enter> to go to Actions.

A Trunk in HP Procuve isnt the same as a Trunk in 3Com. Remove the trunk configuration and tag the VLANs directly at port 25 instead.

Thanks, it is working now. 

For those who has similar question can refer below config.

Running configuration:

; J9019B Configuration Editor; Created on release #Q.11.17

hostname "SW13"
interface 25
   lacp Passive
exit
ip default-gateway 10.10.10.1
snmp-server community "public" Unrestricted
vlan 1
   name "DEFAULT_VLAN"
   untagged 21-26
   ip address 10.10.10.30 255.255.255.0
   no untagged 1-20
   exit
vlan 13
   name "vlan13"
   untagged 1-10
   no ip address
   tagged 25
   exit
vlan 15
   name "vlan15"
   untagged 11-20
   tagged 25
   exit
password manager

SW13#