hi,
I have working configuration as below, However My question is when user role applies what happens to the switch port configuration?
such as service policy and bandwidth port security snmp?
dose any of that change?
what is the order of the user role configuration.. like userrole take precedenc and on same configuration and rest configuration is as it is.
please explain.
I am planning to do the DUR by copy this to advance mode CP user role.
interface 5
name "User-Port"
bandwidth-min output 2 43 20 35
rate-limit bcast in percent 1
service-policy "set_input_qos" in
untagged vlan 40
lldp admin-status disable
port-security learn-mode port-access action send-alarm
no cdp enable
no snmp-server enable traps link-change
aaa port-access authenticator
aaa port-access authenticator tx-period 10
aaa port-access authenticator auth-vid 20
aaa port-access authenticator logoff-period 3600
aaa port-access authenticator client-limit 3
aaa port-access authenticator cached-reauth-period 30
aaa port-access authenticator enforce-cache-reauth
aaa port-access mac-based
aaa port-access mac-based addr-limit 3
spanning-tree root-guard bpdu-filter bpdu-protection
loop-protect
exit
--------------------------------------------------------------------------------
aaa authorization user-role name "Corp"
vlan-id 20
vlan-id-tagged 10
exit