Wireless Access

 View Only
  • 1.  View default WMM to DSCP mappings

    Posted May 27, 2017 10:14 AM

    Is there a command to view the default mappings?



  • 2.  RE: View default WMM to DSCP mappings



  • 3.  RE: View default WMM to DSCP mappings

    Posted May 27, 2017 10:25 AM

    Since that article is several years old, I wanted to confirm that it is still valid and that values have not changed in later releases. Thanks for confirming. 



  • 4.  RE: View default WMM to DSCP mappings

    Posted May 27, 2017 12:04 PM

    You can confirm that by typing "show datapath session table <ip address of phone>" or you can set your own WMM to DSCP mapping in the SSID profile.