From your question, I'd recommend to work with your Aruba partner. Understanding of VLANs/tagged/untagged is critical for a proper deployment, and as you didn't share the vSwitch/ESXi network configuration, it's not possible to answer your question.
------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check
https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
------------------------------
Original Message:
Sent: Dec 07, 2023 07:41 AM
From: mohamed-nabil
Subject: VM Controller
The VM mobility controller is configured on ESXI vmware, eth0 on the VM controller with native vlan 10, but it cannot be accessed.
Therefore, the native vlan of the VM mobility controller needs to be 1 OR not?