Comware

 View Only

  • 1.  Voice VLANs and Trunk/Hybrid Port Types

    Posted May 21, 2015 12:21 PM

    I am trying to figure out what the difference is between a Trunk Port and a Hybrid port. I am working on a voice vlan configuration and I've seen voice vlans be configured on both trunk types and hybrid types. I will be using PoE Cisco phones so I am assuming I want to go with a trunk port. Can anyone add some clarification as to the advantages of both types?



  • 2.  RE: Voice VLANs and Trunk/Hybrid Port Types

    Posted May 24, 2015 10:25 AM

    Hi !

    See the post below will help you ...

     

     

    http://h30499.www3.hp.com/t5/LAN-Routing/Trunks-VLANs-Question/m-p/6692234#M1188



  • 3.  RE: Voice VLANs and Trunk/Hybrid Port Types

    Posted May 26, 2015 08:21 AM

    So in the case of using VoIP phones, in Cisco world, I am used to using a trunked port. Is it advisable to use a hybrid in Comware world even if the Voice VLAN is tagged?



  • 4.  RE: Voice VLANs and Trunk/Hybrid Port Types

    Posted Jun 10, 2015 09:53 PM

    I usually use trunk port on VOIP configuration ... it works normally. But you should not have problems using hybrid port



Related Content