Search

Discussion Reply

RE: Setting up TACACS with 6400/6300 Devices and Cisco ISE

Thanks for the detailed writeup. Regarding the CX configuration; is there a specific reason for only authenticating ssh sessions, while enforcing authorization and accounting for "default"?

Discussion Reply

RE: Setting up TACACS with 6400/6300 Devices and Cisco ISE

It´s working thank you sir!

Discussion Thread 1

AOS-CX Simulator Lab - RADIUS 802.1X Authentication

Discussion Post

6300 Link state resets rate anomaly occurred on interface - AP575

Hi, I've got a couple of AP575 patched into a 6300 switch and I'm seeing the following errors (every few minutes) on the switch on both ports the APs are patched into. Any ideas? MessageEvent|5511|LOG WARN|AMM|-|Link state resets rate anomaly occurred on interface 1/1/7: 0.2...

Discussion Thread 4

6300 Link state resets rate anomaly occurred on interface - AP575

Discussion Post

Aruba AOS-CX tunneled node issue

Hi guys, yesterday I build a lab to play around with the DUR and UBT stuff in AOS-CX. So far everything was working as expected until this morning. I did't changed the setup (and yes everything was saved properly) but the tunneling from a 6300 to an MM manged 7205 won't come up after...

Discussion Thread 4

Aruba AOS-CX tunneled node issue

Discussion Post

Setting up TACACS with 6400/6300 Devices and Cisco ISE

Hi Everyone, Ive created this document that shows how to setup TACACS with Cisco ISE and AOS-CX ! #6300 #6400

A2FD4BDF-44E8-4430-9DBB-CBE2D6DB127E-1-AOS-CX TACACS with CISCO ISE.pdf

Discussion Thread 3

Setting up TACACS with 6400/6300 Devices and Cisco ISE

Discussion Post

COA's and Adding 6400/6300 Devices to Cisco ISE

Hi Everyone, The document attached includes how to add AOS-CX devices into Cisco ISE and how to add the proper information to do a COA As well! #6400 #6300

8828605A-456B-45D1-9F1E-A547C861DA3A-1-AOS-CX devices and COAs W CiscoISE.pdf