Become a Member
Hi - First time on here. I dont do configuration but do the equipment installation portion. Instead of explaining the whole scenario of current issues at a customer site, it would be best to try and find some basic information to start with ... site has AP124' with a 5GHz (ANT-12) directional...
I have a final update for those reading the post....sorry for the huge let down but the orginal AP's now work as well. waa, waaa, waaaaa. Don't get me wrong, I am very pleased they work, I was still hoping though for some fix that was not so obvious. The customer performed another...
FYI Just located three new AP's and configured them for remotes and they all work! So, I guess we will see what TAC says about getting some new AP's. I have already done a purge and a factory-reset on them. #AP124
So, a coworker of mine found some errors in the logs I did not catch. I have attached the messages file as well. 108.15.30.217:4500-> ike2.c (683): errorCode = ERR FRAGMENTATION REQUIRED May 30 11:04:18 isakmpd[1573]: |ike| 108.15.30.217:4500-> IKE getCertId NATT peer-port:0May 30...
One other interesting thing I found troubleshooting.....there is a difference between a working remote AP and the non-working remote AP when I dig a bit deeper into the ipsec sa messages WORKING AP (TBC Dell PC W-650) #show crypto ipsec sa peer 76.182.232.32 Initiator IP:...
I am wondering if that is the problem....let me walk through the configuration of the AP's.. So, a new ap gets plugged into my controller directly, it shows up as "unprovisioned" I go to configuration>ap installation, select the AP and hit "provision" Then I select the new group for the...
Understand on the case/troubleshooting and I have a case but the problem is I have a Dell Controller- Power Connect W 650 so i have to go through Dell. So far they have not been very much help..... #AP124
Let's see the output of "show rights ap-role" #AP124
It actually incrementing by one IP address each time? up to .21 now. #AP124