Become a Member
Hello Airheads Community, I am running 6.4.4.15 on an older 3000-series controller with AP-325s attached as local APs. I have followed the guidance from the following pages and discussions and have both the striping IP configured with an unused IP that is on the same subnet as the lms...
Q: Why radio light switching between Green and Amber on AP325? A: When one radio is configured for access mode and another for monitor mode, the radio light will switch between Green and Amber. Usually when both the radios(A and G) are configured for access mode, light always stays green...
@weinema wrote: We run 6.4.2.2 and have the same problem with our 19 AP-275 APs and HP ProCurve switches. My workaround... 1. Disable "PDU transmission" and "Reception of LLDP PDUs“ for eth0 of the AP group 2. Manually set the (reserved) PoE value for the switch port and...
EDIT: Sorry. It appears I had out of date data sheet. New version of DS has nice antenna pattern plots. Please del this post. http://www.arubanetworks.com/assets/ds/DS AP320Series.pdf Hi, Anybody has AP 325 (or 335) antenna propagation pattern charts? These APs have 30 deg max...
The ap 325 specs report: Two 10/100/1000BASE-T Ethernet network interfaces (RJ-45) Auto-sensing link speed and MDI/MDX Load balancing support to achieve platform throughput greater than 1 Gbps Can anyone point me to docs on how the wired load balancing works and/or is set up? Has...
We are using controller base solution. 85% of the wifi coverage is using AP105. We recently purchased AP320 Series (325 and 324). What is the best way to configure AP320 so that it won't interfere with AP105? Can we still use the same ESSID with 2 different profiles (AP Group, VAP, ARM, SSID)? ...