Become a Member
I have setup to vlan interfaces with four ports in each vlan. The vlan are numbered 1 and 2. How do I get traffic from one vlan to go to the other rather than through the WAN port? For example: VLAN 1: 10.102.128.0/24 VLAN 2: 10.0.1.0/24 #VLAN #MSR
Current Config: line vty 0 10 authentication-mode scheme user-role network-operator protocol inbound ssh idle-timeout 20 0 # role default-role enable level-0 #Without this, you can login but you will #be instantly disconnected. Please note! # domain default enable system # ...
I'll take a look at this document (my documentation on the matter is a bit outdated - doc version 6PW100-20110810). Thank you #MSR #sFlow
Hi all, I'm trying to connect a Comware v7 device to MS-Azure using the router based Site to Site VPN solution based on the Cisco ASR example configuration supplied by Microsoft. The Ikev2 SA shows connectivity has been established: Tunnel ID Local Remote Status -- 835 213.125.252...
We have the following DNS Server configuration with the MSR3012 with IP and DNS given by DHCP. The HPE 1 and HPE 2 devices are linked to level 3 on a point-to-point ip interface: CONFIG HPE 1 interface g0/0 ip address 192.168.134.1 255.255.255.0 no proxy-arp enable no ip...