Become a Member
I am running an HPE MSR3044 router. I have a bgp session setup as follows with my ISP with one link between us and I have implemented NAT444 and it has worked well. I've obviously changed the IP addresses below for security purposes in this post. bgp 65004 router-id 7.7.7.7 peer 9.1.1.1 as...
Hi, I set up an MSR 2004 router for one of my customers. Generally speaking, I'm super happy with the router. However, I can't get the outbound telephony to work. When I dial a number on one of the sip phones, the call ususally just times out without being created at all. Inbound calls are...
Hi, I have a MSR2003 using an ADSL SIC connected to verizon DSL and I have got the PPPOE to work, but it seems like I can only get to some http/https sites. FTP outbound seems to work with ASPF policy. Here is my config below. Any tips would be great. Thanks. I can ping www.google.com and...
Hello Guys. I have an MSR20 routers and i need to configure NAT on it so that my internal clients can use the public IP address of the router when accessing the internet. What are the configuration commands for doing this ? please help. thanks. #NAT #router
Hello, We have bunch of sites connected by IPSec tunnels between central Cisco 3800 and remote MSR-900 Everything is fine when remote site uses white IP. But when ISP provides grey one e.g. 192.168.1.200, we have problem transmitting traffic over IPSec. By my opinion,...
5878679_msr-debug.txt