Become a Member
Hi, on a Cisco PIX I had a config where the WAN port was 1xx.1x.253.10 and the LAN subnet was 1xx.1xx.68.0/24 - a public IP range. I had PAT setup so that I could open and close ports for the LAN subnet. By default all incoming ports were closed. If I opened the RDP port then RDP could be...
First off sorry, I wasn't for sure which board to post this to, and a strange question to ask on an HP forum, but this forum has been for helpful then most of the Tech Support type forums. Iโm looking for a good security solution for my business network. Currently I utilize a cisco router, and 3...
Hello, We have a firewall connected in one HP procurve 2610 switch port and another to an internal switch procurve HP 2910. In the first switch (2610) we have connected the router and in 2910 HP the servers and other final client PCs switches (stacked 2610) Among all the switches is...
Hi all, I'm trying to setup a L2TP/IPSEC VPN with my HP VPN FW Mod JG372A behind NAT. All manuals and guides that I read explains how to setup a site-to-site vpn L2TP/IPSEC only, but I want to setup a client-to-site one. The HP Firewall is behind a NAT device. I want to be able to...
I'm seeking a little bit of help with implementing iMC Remote Site Manager. Firstly the readme provides a list of ports the module binds to, however it does not clarify which ports need to be open between the RSM component and the iMC core. Which ports must I open in a firewall between...