Become a Member
Hi Ivan B, thank you for your reply. I received now the switch and, after changing the layout and the vlan, I am trying to configure the PBRs. But unfortunately doesn't work. It seems that acl are ignored. This is my configuration: UPE 5130 EI 24 SFP with firmware: 7.1.070 Release...
Hello, I need to implement PBR for ipv6 on HPE 5920AF switch and when I attempt to apply it to interface, I get error [switch-Vlan-interface2]ipv6 policy-based-route PBR-ipv6 Not enough resources to complete the operation, slot 1. but checking reqources, there should be enough of them ...
Hi everybody. I'm running a 2 units HP/H3C S5120 stack with IRF Link. Firmware version is Comware Software, Version 5.20, Release 2221P02 Copyright (c) 2004-2014 Hangzhou H3C Tech. Co., Ltd. All rights reserved. H3C S5120-28C-EI uptime is 5 weeks, 0 day, 15 hours, 26 minutes H3C S5120...
Hi All, Question regarding Policy Based Routing. First time I make use of the functionality and I wonder whether what I'm hoping to achieve is possible :) We are changing ISPs and I was hoping to test the new connection from a specific subnet. Routing is obviously set up to use the...
Hello, I would like to create a policy based route to route on source & destination. For example: Traffic from vlan 100 with destination 172.20.100.0/24 needs to be routed via router 10.100.254.254 Traffic from vlan 200 with destination 172.20.100.0/24 needs to be routed via router 10...