中文讨论区

Reply
Aruba Employee

如何恢复Airwave的命令行密码

Airwave CLI密码的回复过程如下:

在开机时,按E,进入启动配置模式,具体如下图

air1.png

选择CentOS,然后继续按e ,如下图:

air2.png

通过键盘上的↑和↓键,选择带有Kernel的那一行,还是按E,具体如下图:
air3.png
在出现的这一行字符的最后面,输入空格+single,具体如下图:

air4.png

 

这时候,输入回车,回到刚才的界面,具体如下图:

air5.png


这时候,按“b”来重启设备,在经过重启以后,你将直接登录到系统里面,具体如下图:

air6.png

输入passwd root,来修改root账号的密码,具体如下图:
air7.png
这时候,通过reboot命令来重启系统,就可以通过新的root密码来登录系统了。

 

Moderator

Re: 如何恢复Airwave的命令行密码

以上为Airwave 8.2.4之前的恢复方式, 8.2.4之后更改为:

If you forgot your CLI password, you can generate a recovery key and contact Technical Support to decode the
key and provide recovery password to you.
To reset your password:
1. From a local terminal, or the VM host console, log in using the amprecovery credentials:
<AMP server> login: amprecovery
Password: recovery
2. Select 1 to generate the recovery key.
3. Select 2 to upload the recovery key to another server using an SCP file transfer application.
4. At the prompt, enter the destination location for the file (for example, user@host:path. User is the name of
the account on the destination computer, host is the hostname or IP address of the computer on which the
file will be transferred, and path is the path of the destination folder).
5. At the prompt, enter the password on the destination computer.
6. Send the recovery.gpg file to Technical Support for key translation.
7. Select 3 to activate the recovery password, then press y to continue.
8. Enter the password you received from Technical Support. If you enter the password incorrectly, the password
remains unchanged.
9. Log out from the recovery user.
10.Log back in to the CLI as ampadmin using the recovery password:
<AMP server> login: <ampadmin>
Password: recovery password

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: