ClearPass license activation failure.

MVP Expert
MVP Expert
Problem:

Experiencing ClearPass license activation failure with the error "License could not be activated" and noticed the below warning in the ClearPass system event viewer.

 



Diagnostics:

This issue is observed after the certificate renewal of online license activation server.

The ClearPass server's existing code(internal trust) did not match the trust chain of the new certificate of the online activation server and resulted in license activation failure.

 



Solution

ClearPass team have released the following patches to update the internal activation server certificate chain to address this issue. These patches can be installed on any of the ClearPass 6.6.x and 6.7.x versions to address this issue.

 

ClearPass 6.6.X Hotfix Patch for Updating Activation Server Certificate

ClearPass 6.7.X Hotfix Patch for Updating Activation Server Certificate 

 

The above patches can be downloaded online and installed on the server under Administration >> Agents and Software Updates >> Software Updates >> Firmware & Patch Updates.

Note: The above patch do not require server reboot. This issue had already been addressed in ClearPass 6.7.8, so installation of this patch is not needed from 6.7.8 release.

 

Customers with older versions (6.5.x and below) may open a TAC case to get the license activated online.

Note: ClearPass versions 6.5.x and below are end of support and we strongly recommend upgrading the servers to currently supported versions/firmware.

Version history
Revision #:
2 of 2
Last update:
‎12-21-2018 08:20 AM
Updated by:
 
Labels (1)
Contributors
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: