Access Points

New Contributor

AP latency to remote controller

Is there a Aruba document that shows the maximum latency for a Aruba 135 and 105 deployed at a remote site with no local controller connecting to a 7200 series controller over the WAN?
Or a Aruba document that has best practices outlined for a regional deployment?

Re: AP latency to remote controller

You can read this doc doesn't specifically talks about the 135/105 to 7200 connection from a remote location but addresses some of your questions in regards best practices for remote locations
How do you have the VAP configured ? Tunnel / split tunnel ?
Thank you

Victor Fabian
Lead Mobility Architect @WEI
Guru Elite

Re: AP latency to remote controller

Read this document about deploying APs over slow links:

*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
New Contributor

Re: AP latency to remote controller

Thank You

Search Airheads
Showing results for 
Search instead for 
Did you mean: