Reply
Highlighted
MVP Guru Elite

Bug 36819 : client disassociating when 7 or more clients in AP 125

Hi

I see in the last release note (in 3.4.1.1 and 3.4.0.7) the following bug :
36819 When seven or more clients are connected to a single AP-125, clients are no longer disassociating and associating when additional clients are added.

this ist not really clear !
the problem is when there are 7 or more clients connected to a AP125, the first connected clients are disconnected from new clients connected? and it is impossible to get more 7 clients connected to a single AP ?

and I also have some questions

  • the release 3.3.x is also affected?
  • the AP-121 is also affected ?


PowerArubaSW: Powershell Module to use Aruba Switch API for Vlan, VlanPorts, LACP, LLDP... More info

PowerArubaCP: Powershell Module to use ClearPass API (create NAD, Guest...) More info

PowerArubaCX: Powershell Module to use ArubaCX API (get interface/vlan/ports info)

PowerArubaIAP: Powershell Module to use Aruba Instant AP

PowerArubaMC: Powershell Module to use Mobility Controller / Master


ACMP 6.4 / ACMX #107 / ACCP 6.5 / ACSP
Highlighted
Guru Elite

Bug 36819


Hi

I see in the last release note (in 3.4.1.1 and 3.4.0.7) the following bug :
36819 When seven or more clients are connected to a single AP-125, clients are no longer disassociating and associating when additional clients are added.

this ist not really clear !
the problem is when there are 7 or more clients connected to a AP125, the first connected clients are disconnected from new clients connected? and it is impossible to get more 7 clients connected to a single AP ?

and I also have some questions


  • the release 3.3.x is also affected?
  • the AP-121 is also affected ?




The bug was first found in 3.3.2.19 and only affected 802.11n clients. The workaround is to turn off HT, or high throughput. It was fixed in 3.3.2.22. The symptom is after 8 clients are connected to an 802.11n access point that an 802.11n client has a problem maintaining connectivity.

Please contact support if you want more technical details.

*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Video Knowledge Base
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide
Highlighted
MVP Guru Elite

Re: Bug 36819 : client disassociating when 7 or more clients in AP 125

Thanks for information



the bug is present in older release ?



PowerArubaSW: Powershell Module to use Aruba Switch API for Vlan, VlanPorts, LACP, LLDP... More info

PowerArubaCP: Powershell Module to use ClearPass API (create NAD, Guest...) More info

PowerArubaCX: Powershell Module to use ArubaCX API (get interface/vlan/ports info)

PowerArubaIAP: Powershell Module to use Aruba Instant AP

PowerArubaMC: Powershell Module to use Mobility Controller / Master


ACMP 6.4 / ACMX #107 / ACCP 6.5 / ACSP
Highlighted
Guru Elite

Older Release


Thanks for information


the bug is present in older release ?




I don't see anything that says it was tested in older releases, just when it occurred and when it was fixed.

*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Video Knowledge Base
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: