10-07-2009 06:47 AM
HI does anyone know if you can use the second ethernet port on an AP 70 to daisy chain to an AP-61 AP we are unable to run extra Cable and don't want to Mesh.
Yes you can.
*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Learning Videos
Aruba Central Documentation
ArubaOS Consolidated Release Notes
Aruba Technical Webinars
Re: cascading AP-61 from ethernet port on AP-70
10-22-2009 10:10 AM
You need two things at a minimum, a wired AP profile in your AP group that enables the second port and a AAA profile that sets the initial role such that the AP can connect to the controller. Your wired AP profile might be something like:
ap wired-ap-profile "wired-ap-prof"
switchport access vlan
Your AAA profile is just like any other, and if only APs are using it you could set the initial role to the AP role.aaa profile "wired-aaa-prof"
Then you need to set the wired AAA to be used.aaa authentication wired
That should get you going...
Director, Strategic Account Solutions