ArubaOS and Controllers

Reply
Moderator

Controller VIA configuration

Hello

I want to set up a controller to provide remote access to clients with the VIA client. I have been reading the manuals (version 5) and I am preety confident about most of it. However, I still have some doubts regarding IKE policies and IPSec crypto maps. Do any of you guys have an example of a working configuration?

Thanks a lot

Samuel Pérez
ACMP, ACCP, ACDX#100

---

If I answerd your question, please click on "Accept as Solution".
If you find this post useful, give me kudos for it ;)
Guru Elite

Re: Controller VIA configuration

You should not have to setup any crypto maps. The defaults are fine. The only gotcha that is not mentioned in the manual is that you have to setup an IKE shared secret in Configuration> Advanced Services> VPN Services> IKE shared secrets (it does not have to match anything, one just needs to be setup).

*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: