ArubaOS and Controllers

Reply
New Contributor

DHCP Option so that AP can see aruba Controller

Dears,
we have the aruba AP connected to cisco Switches , and the DHCP is from the cisco switch . now the question is what option i need to configure in cisco DHCP so that the AP can see the controller . i had read about option 43 and put the IP of the master . but for some reason it is not working . is there any clue ?
Guru Elite

Re: DHCP Option so that AP can see aruba Controller

You also need to set option 60, which is a text option of "ArubaAP"

*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
New Contributor

Re: DHCP Option so that AP can see aruba Controller

so it should be like this ?
option 60 ascii "ArubaAP"
option 43 ip x.x.x.x
right ?

thanks :)
Guru Elite

Re: DHCP Option so that AP can see aruba Controller

Please see attached

*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: