ArubaOS and Controllers

Occasional Contributor II

How to configure DHCP Option 43?

Can any one guide me how to configure DHCP Option 43 in DHCP Server (MS-Server2008) in order to assign the AP's the controller's ip address.
Guru Elite

Appendix A

In the ArubaOS 5.0 Appendix A, there is a section "DHCP with Vendor-Specific Options" that tells you how to do this.

*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Search Airheads
Showing results for 
Search instead for 
Did you mean: