ArubaOS and Controllers

Reply
Occasional Contributor II

How to debug on the controller

Does everyone know how to enable debug (like CISCO router or SWITCH) on the controller?
Guru Elite

Re: How to debug on the controller

There are a number of types of debugging you can do. It all depends what you are looking for.

*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Occasional Contributor II

Re: How to debug on the controller

Can you give an example?
How to debug the spanning tree, and how to display the debug log?

Thanks.
Guru Elite

Re: How to debug on the controller

An article in the knowledgebase specifically about spanning tree is here: http://kb.arubanetworks.com/cgi-bin/arubanetworks.cfg/php/enduser/std_adp.php?p_faqid=770

*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: