Occasional Contributor I

Layer 3 deployment

Hi Guys,

At the first, im sorry for my terrible english :)

Anybody know, which is the best way, if the customer use a layer-3 infrastructure? Dont have vlans, only many network mask-separated segments which are protected by firewalls and routers. Dont have core router, trunk ports and VLANs.

The customer want, the all local communication stay in the local-side. It means, if the user connect to the SSID1, and start network printing to the network1 printer, the packets dont going thru the controller - like as RAP split tunnel, but stay in the network1 side - andif the user would like connect to network2 resources, the packets going thru the controller.


Guru Elite



You would have to configure the Virtual-AP in bridged mode to do this.

*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Search Airheads
Showing results for 
Search instead for 
Did you mean: