ArubaOS and Controllers

Reply
Regular Contributor II

New DHCP server clients not seeing

We have set up a new DHCP server. The old one was having hardware issues. The clients are not seeing the new server. Is there anything on the Aruba controller to point the clients to it?
Guru Elite

Re: New DHCP server clients not seeing

If the dhcp server has a different ip address, you need to adjust the ip helper-address parameter on your Vlan interfaces to point to that new server.....

*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Regular Contributor II

Re: New DHCP server clients not seeing

Is there a way that it could point to both servers at the same time? Because we have DHCP reservations by MAC address for an application.
Guru Elite

Re: New DHCP server clients not seeing

You can put in two ip helper-address statements for each interface; one to point at one DHCP and one to point at another.

*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: