ArubaOS and Controllers

Reply
New Contributor

Updated firmware to 5.0.4.1

Hi All,

I have recently updated my Aruba controllers OS (2 x 3400 and 2 x 800) from 3.4.2.3. to 5.0.4.1. I have 93 APs connected in my campus.

After the update, I noticed that when i click on the monitoring\controller\Access points, i only see those APs connected to this controller. If im not remembered wrongly, before the update, i was able to see all 93 APs connected.:(

Is this a bug or a new feature? :confused:

Can someone give me some advise? :D

Regards,
Guru Elite

Re: Updated firmware to 5.0.4.1


Hi All,

I have recently updated my Aruba controllers OS (2 x 3400 and 2 x 800) from 3.4.2.3. to 5.0.4.1. I have 93 APs connected in my campus.

After the update, I noticed that when i click on the monitoring\controller\Access points, i only see those APs connected to this controller. If im not remembered wrongly, before the update, i was able to see all 93 APs connected.:(

Is this a bug or a new feature? :confused:

Can someone give me some advise? :D

Regards,




No. Anything under Monitoring> Controller is ONLY on the current controller that you are currently logged into.

The Main Monitoring Screen on the master should have a count of all your access points.

*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: