ArubaOS and Controllers

Reply
New Contributor

exact cli command for user-debug

I am trying to enable debugging for one wireless client that seems to be dropping network access randomly. The command i am putting into the CLI is

(Aruba3400) #configure terminal logging level debugging user-debug 001b77471433


I keep getting the following error when i hit enter


Aruba3400 #configure terminal logging level debugging user-debug 001b77471433 ^
% Invalid input detected at '^' marker.

any ideas?CL
Highlighted
Guru Elite

Re: exact cli command for user-debug

the mac address needs to be in the format xx:xx:xx:xx:xx:xx

The letters need to be in lower case.

To see the debug, "use show log user-debug "

*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Video Knowledge Base
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide
Highlighted
Occasional Contributor II

Re: exact cli command for user-debug

How do I show log user-debug and specifically drill down to the user's Mac I wan to see.  I only see the option for "all".

Highlighted
Guru Elite

Re: exact cli command for user-debug

Highlighted
Occasional Contributor II

Re: exact cli command for user-debug

Thanks