Cloud Managed Networks

Hello,

I recently "screwed up" change a role for a WLAN(SSID), so i was wondering how to do this with success?

I tried to change it at; Mobility(top level for both controllers) controller=>Configuration=>Wlans=>"WLANXX"=>Access and then change the "Default Role". 

However, clients are still stuck on the old role, even after a reboot of the controller. 

Where am I failing?

AMC 8.2.1.0 (In VRRP)

Best regards,

1.  You should not have to reboot the controller for anything besides a change in firmware.

If you make a change, you should be able to disconnect clients on the commandline of that MD (controller) using "aaa user delete":

(aruba7640) #aaa user delete 
all                     Delete all users. Can take upto 5 mins if there are
                        large number of users getting deleted
ap-ip-addr              Match AP IP address
ap-name                 Match AP name
mac                     Match MAC address
name                    Match user name
role                    Match role name
A.B.C.D                 Match IP address

If you rebooted the controller and clients are still stuck in the wrong role, you made the wrong change.

yes.