Command of the Day

Reply
Guru Elite

Support

Your best option is to open a case with support. That modem hardware is working with other providers, but your provider might require special dial strings.

*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Occasional Contributor II

Egypt 3G Modems

Hi hnagy you call me for any help my phone 0107323434 and ill sen u a email include the data , I Ahmad Osman
Aruba Employee

Re: COTD: How to provision a RAP-5wn via Zero Touch Config and a USB 3G modem.

Init string and dial strings are the standard ones.
You should leave device ID empty
Device should be other
Device type should be option

And remember to disable PIN verification on the SIM card.

Cheers.
S.



I need the 3G Parameters for Etisalat, Mobinil and Vodafone in Egypt.
right now, I have Etisalat modem "Huawei E160"
1. For the "Device", which one to choose from:
• Mercury Sierra Compass 885 (ATT)
• Ovation U727 / U720 /U300 (Sprint/Verizon)
• Quicksilver Globetrotter ICON 322 (ATT)
• UM175 / UM150 (Verizon)
• USB 598 /U597 / COMPASS 597 (Sprint/Verizon)
• USBConnect 881 (AAT)
• Other (Any)

2. What is the Initialization String?
3. What is the Device Identifier (Hex)?
4. What is the Device Type or Cellular Modem Driver, which one to choose from:
• Acm
• Hso
• sierra-evdo
• sierra-gsm
• Option


New Contributor

Where do you set APN settings?

Hi,

I am wondering where i should set the APN in the settings, cant find anything about APN?
Guru Elite

Re: COTD: How to provision a RAP-5wn via Zero Touch Config and a USB 3G modem.

The APN would be put in the "Initialization String" box. Which modem are you trying to configure?

*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Contributor I

I've Done the Steps But No Advanced Settings Selection

or option on the RAPCONSOLE webpage. I've installed firefox, cleared web cache, etc and all I have is the box that shows the RAP information and the box to enter the CONTROLLER IP ADDRESS.

If I cannot get to the advanced settings page, then 3G USB is all for not. Any ideas? Thanks in advance.

Bruce
Guru Elite

Re: COTD: How to provision a RAP-5wn via Zero Touch Config and a USB 3G modem.

To upgrade the provisioning image on a RAP5, please consult here: http://airheads.arubanetworks.com/vBulletin/showthread.php?t=2151

*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: