Community Feedback

Reply
Highlighted
New Contributor

7030 Controller auto provision from factory defaults

What is the difference between the Master switch IP address or FQDN and the Uplink VLAN Static IP address that is setup during auto-provisioning after the controller was set to factory defaults. I can login to the controller with the VLAN static IP but not the Master IP.

Highlighted
MVP Guru

Re: 7030 Controller auto provision from factory defaults

The Master Switch IP (or its FQDN) would be the IP address of either the Mobility Master or Master Controller if the local controller is to be managed by a different device.

 

The Uplink VLAN Static IP is the IP address of the local controller you are provisioning


ACMP, ACSA, ACDX #985
If my post addresses your query, give kudos:)
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: