05-28-2019 10:57 PM
- Separate LAN into 3 different VLAN
- Granting access to the Internet to those 3 VLAN through VLAN 1000
Issue : Unable to access the Internet from a PC connected to any of those VLAN : 100,110,120. I attached my configuration. I think I missed something important. Any help much appreciated.
Router Edgerouter X configuration
- LAN IP : 192.168.22.1/24
- Static routes :
set protocols static route 192.168.100.0/24 next-hop 192.168.22.253
set protocols static route 192.168.110.0/24 next-hop 192.168.22.253
set protocols static route 192.168.120.0/24 next-hop 192.168.22.253
SWITCH HP Aruba 2930F VLAN configuration
Untagged : 1-2
Untagged : 3-4
General affairs department
Untagged : 5-6
Untagged : 7-8
SWITCH HP Aruba Aruba-2930F-8G-PoEP-2SFPP whole configuration
; JL258A Configuration Editor; Created on release #WC.16.05.0007
module 1 type jl258a
ip default-gateway 192.168.22.1
no ip source-route
snmp-server community "public" unrestricted
no untagged 1-8
ip address dhcp-bootp
name "CS department"
ip address 192.168.100.253 255.255.255.0
name "General affairs department"
ip address 192.168.110.253 255.255.255.0
name "Finance department"
ip address 192.168.120.253 255.255.255.0
name "VLAN interconnection"
ip address 192.168.22.253 255.255.255.0
Solved! Go to Solution.
05-29-2019 12:18 AM
Can you try to add to the switch an 'ip route 0.0.0.0 0.0.0.0 192.168.22.1'. Check this post to see that ip default-gateway is just for the switch itself in 'no ip routing' mode.
Also if that doesn't work, check on your router if it will perform NAT for all traffic coming into the LAN interface, or just for the subnet on that interface. Some routers only NAT or allow traffic from the subnet, not if it is routed like in your case.
If you have urgent issues, please contact your Aruba partner or Aruba TAC (click for contact details).