Community Feedback

Reply
Occasional Contributor II

Configuration DHCP in master-local mode

Hello all ,

 

Anyone have information regarding configuration  of DHCP in master-local mode .

We have before standalone controller and act as dhcp server and all are working.

After we add the additional controller to act as local and we configure DHCP server in local controller , the client is assigned ip address but not able to access internet.

What should be the scenario we  need to make for local controller to work well as before ?

 

Kindly assist.

Highlighted
Guru Elite

Re: Configuration DHCP in master-local mode

What device is the default gateway of your users?


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
ArubaOS Consolidated Release Notes
Aruba VIA ASE Solution - Configure VIA VPN
Highlighted
Occasional Contributor II

Re: Configuration DHCP in master-local mode

Clients are receiving gateway as local controller IP in the master-local setup.

 

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: