Community Feedback

New Contributor

IAP387 Reviewing 60 gHz Radio

I have AP387 in instant cluster providing mesh link peer to peer. When I look at the mesh link and at radio profiles, I only see entries for 5 gHz and 2.4 gHz for this AP cluster.

Do you know how to view the 60 gHz channel utilization and data?

MVP Guru

Re: IAP387 Reviewing 60 gHz Radio

The IAP-387 does not have a 2.4GHz radio, it has 1x 5GHz and 1x 60GHz. Are you running on the latest firmware?


Please check this post on how to set up the IAP-387 in standalone mesh mode which probably is what you want.

If you have urgent issues, please contact your Aruba partner or Aruba TAC (click for contact details).
New Contributor

Re: IAP387 Reviewing 60 gHz Radio

Thanks for the info. I know the aps have only 60 gHz and 5 gHz radios on this model. However, the instant software only shows metrics for 2.4 and 5 gHz radios.


The aps are currently set up in standalone mesh mode and linked through the 60 gHz radio, but I can't find what channel it is using or its uptime.

Search Airheads
Showing results for 
Search instead for 
Did you mean: