Community Feedback

Reply
Contributor II

https access

I have Aruba 7210, 6.4.4.10.  I can https to it from one network but not from other networks. Is there a place in configuration where you specify what networks you can https to it?  I checked the firewall and it's allowing access ssh and https from the networks.


Accepted Solutions
Highlighted
Guru Elite

Re: https access

You might be able to initiate management connnectivity on port 443, but ultimately it redirects on port tcp 4343.  Make sure that is allowed.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
ArubaOS Consolidated Release Notes
Aruba Technical Webinars

View solution in original post


All Replies
Highlighted
Guru Elite

Re: https access

You might be able to initiate management connnectivity on port 443, but ultimately it redirects on port tcp 4343.  Make sure that is allowed.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
ArubaOS Consolidated Release Notes
Aruba Technical Webinars

View solution in original post

Highlighted
Contributor II

Re: https access

That was it.  Thanks Cjoseph!

 

Ken

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: