Community Feedback

Reply
Highlighted
Occasional Contributor II

set up SSH public-key authentication to connect to a ClearPass?

Hi,

 

How to set up SSH public-key authentication to connect to a ClearPass (6.7.10 on C1000 platform)?

 

According to below post, I should get a "network" option under the configuration but I can't see it.

https://community.arubanetworks.com/t5/AAA-NAC-Guest-Access-BYOD/How-do-I-set-up-SSH-public-key-authentication-to-connect-to-a/ta-p/274857

 

Can anyone please help me how to set up SSH public-key authentication to connect to a ClearPass?

 

We use "rancid" to fetch config and after implementation of 802.1X on cisco switches, the rancid fails for authentication. It uses ssh keys.

 

Thank you. 

Highlighted

Re: set up SSH public-key authentication to connect to a ClearPass?

Just checked on version 6.7.7.109065 and can see SSH Public Keys: under Network. Just to make sure, you are looking at the following path:
Administration » Server Manager » Server Configuration - Server Name

 

Can you share a screenshot of what you are seeing?

JayBee
ACDX | ACCX| CCIE (RnS/SP,DC) | ACCP | ACMP | ACSA | ACMA | CWNA | JNCIS | JNCIA
If the provided solution resolves your issue, please mark it as accepted solution to help others.
Highlighted
Occasional Contributor II

Re: set up SSH public-key authentication to connect to a ClearPass?

Hi Jibran,

 

Attached is a screenshot. 

 

Thanks for your time. 

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: