Clone AP Configuration
I am trying to clone the configuration from one AP to another. Im running this command
and then i get this message "AP name 'AP02' undefined"
Am i missing something to run this command? It's between two RAP5 and im running version 126.96.36.199 and even tried on a 188.8.131.52 version.
The reason why I want to clone the configuration from one RAP5 to another is because that RAP5_01 works with a 3g dongle and i want RAP5_02 to have the same configuration to work with a 3g dongle as well.
So copying the AP-group wont work in this case.
The 3g/4g card configuration is not located on the controller. It is programmed into the flash of individual devices. If you want to program them into multiple devices, you can use a provisioning profile: